Autocrypt FAQ¶
Frequently Asked Questions¶
Why is there no key verification mechanism?¶
There are a couple of reasons for holding off on this for now:
Most OpenPGP implementations support verification of keys by asking the user to compare fingerprints, so in practice there is already a way to do this in most clients.
Conversely, since there is established tradition, there will likely be pushback against whatever mechanism we introduce.
Verification requires user interaction, and introduces a lot of friction. But even without verification, encrypted messages leak much less information than plaintext. For that reason, getting key management right is currently the more pressing issue.
If a user verifies a key on one device, we have no good way of synchronizing this to other devices, yet. This is a difficult problem to solve in e-mail, and leads to a shoddy user experience at best.
That said, we do plan to introduce a simple but effective verification mechanism at some point.
The NEXTLEAP EU project has done some R&D regarding key verification questions and protection against active network-adversary attacks, see the countermitm verification protocols some of which are implemented with the Autocrypt-enabled DeltaChat app. DeltaChat implemented “setup contact” and “verified group join” work flows which try to tackle key verification without talking to users about keys. This has not yet been fully discussed within the Autocrypt context but it’s an interesting approach to look at as it is implemented already and received a first round of thorough user-testing late 2018.
How does Autocrypt differ from PEP?¶
Autocrypt and PEP are different approaches to opportunistic e-mail encryption.
The PEP effort predates Autocrypt by a few years and involves a foundation and two companies which provide FOSS and paid offerings. PEP offers the GPL-licensed PEP-Engine and adapters which can be integrated into MUAs if licensing permits. After Autocrypt was announced as a new e-mail encryption specification, PEP also started specification efforts. As far as we know there are no independent implementations of the PEP protocols. The PEP organizations maintain their own software products that integrate the pEp engine.
Autocrypt was created in December 2016 by several independent mail app implementors and folks from the e2e e-mail encryption space. Afterwards, they publicly collaborated, conducted specification sessions, early user-testings and learnt from each others early implementations efforts. At the end of 2017 they settled and published the Autocrypt Level 1 specification which was updated to version 1.1 in February 2019. The specification is implemented by a growing number of independent mail apps, allowing for cross-app end-to-end email encryption. Note that Autocrypt does not offer any software downloads but supports MUA implementors to add Autocrypt support. Autocrypt has has no formal organization, company or funding as of February 2019. Autocrypt is jointly run and cared for by independent actors who typically aim at reaching rough consensus among each other, and who are well-known in the OpenPGP and e-mail encryption community of which they are a part of.
There are also a few technical differences despite both efforts supporting opportunistic key management, for example:
PEP generates one key per device and encrypts to multiple keys for one recipient. Autocrypt only uses one key per e-mail address, to reduce security concerns and implementation complexity.
Autocrypt specifies how MUAs share the encryption setup between different mail apps. This is implemented and reported to work between different Autocrypt-enabled MUAs. PEP does not yet offer sharing of the encryption setup between different PEP-integrating MUAs but is working on a synchronization feature.
Autocrypt wants to avoid unreadable mails and will in some situations rather recommend cleartext mail even if an encryption key was seen in earlier messages. PEP encrypts to a recipient as soon as there are known encryption keys.
To conclude, Autocrypt is a specification and thus could be implemented by the PEP products. Several Autocrypt community members would consider changes to the specification if this would help PEP to adopt Autocrypt like several other mail apps already do.
Why are you using headers rather than attached keys?¶
Attachments are visible to users of non Autocrypt-compatible MUAs, while headers are not. We don’t want to present distracting or confusing material to those users.
Why are you sending keys in all the mails and not just announcing capabilities?¶
We played with capabilities in a previous design. We decided against them because they require the MUA to keep the information who announced Autocrypt and who they requested keys from. This is particularly complicated in multi-device settings.
Why also RSA3072 and not only Curve 25519 keys?¶
Curve 25519 keys are shorter, cheaper to compute on, and likely to be at least as strong as RSA 3072 against non-quantum attackers. You can even write them down as a backup code. However, the 1.0 version of the Level 1 spec mandated RSA 3072 keys for ecosystem reasons and only the more recent 1.1 version from February 2019 now mandates that the new default scheme for creating Autocrypt keys is Curve 25519 keys. Autocrypt MUAs must still support RSA keys to help with a smooth transition for everyone. We are working with Autocrypt enabled mail implementations to help them move towards Curve keys during 2019.
So you say you care about header size… but then you type out prefer-encrypt?¶
An ECC key is roughly 500 bytes formatted in Base64 and RSA 3072 key is about 2350 bytes. The Length of an attribute name does not matter so much. So we opted for readability.
Why do you drop all headers if there is more than one?¶
We could come up with rules on which header to pick. But whatever we do, it has to be deterministic, clear and agreed upon by all MUAs so their behaviour is predictable and stable for users who might try multiple MUAs.
Dropping all headers is the simplest way to avoid an ambiguous state in level 1. Once we have more experience from the field we’ll know how this fails and at that point we’ll be in a position to draft more complicated rules.
Forcibly rejecting multiple headers deters MUAs from gratiutously sending conflicting headers which may confuse recipients.
What if I want my MUA to announce two different keys?¶
Level 1 aims to keep the complexity low for MUAs growing Autocrypt
support. If we want to enable multiple headers in the future we can
still add Autocrypt
headers using a new critical attribute.
Versions that do not support it will ignore these headers as invalid and
just use the single valid Autocrypt header.
Why do you use the addr
attribute rather than the uid from the key?¶
We want to be able to handle the header without having to parse the key first. We believe that using the ‘addr’ attribute will be more forward compatible. For example we discussed hashing the uid in the Level 1 PGP keys so in case they leak to keyservers they do not leak the e-mail address. This would not be compatible with requiring the e-mail address as the uid.
How does Autocrypt interact with message signing?¶
In general, Autocrypt assumes that mail is either plaintext mail, or it is both encrypted and signed. This assumption makes it possible to create a simpler user experience.
While there are valid usecases for signed, unencrypted mail, or for encrypted, unsigned mail, they are not the use case targeted by Autocrypt.
Why use OpenPGP and PGP/MIME instead of some other encryption tech?¶
We picked a commonly-understood and widely used decentralized mail encryption standard and technology so that implementers wouldn’t need to start from scratch.
Future levels of the Autocrypt specification may support different encryption technologies, but the main immediate goal is to get wider adoption, not to re-invent the encryption mechanism itself.
Why don’t you use the User-Agent
header to detect different mail apps?¶
Not all mail apps send a User-Agent
header (and there is an ongoing
effort to discourage its use as a way to reduce metadata leakage).
Also, some mail apps are used only to read mail, and are not used to
send at all, so the remote peer can’t see anything about those specific
apps.
We could encourage each MUA to publish a UUID to inform the remote peer that multiple mail apps are in use, but it’s not clear that this offers much benefit, and it leaks information that we may not want to leak.
What about spammers accidentally downgrading encryption?¶
A spammer who forges mail from a given address could potentially downgrade encryption for that person as a side effect. Please see the Level 1 documentation for details about expected interaction with spam filters.
How does Autocrypt interact with today’s mailing list managers?¶
Mailing lists that distribute cleartext (unencrypted) mail may end up
distributing their user’s public key material in the
Autocrypt
headers of the distributed mail. For mailing
lists that rewrite From
headers, these
Autocrypt
headers will be dropped by recipients, which
is fine.
For encrypted mailing lists like schleuder, we haven’t done a full analysis yet. Help welcome.
Why do you require MUAs to detect if another is using Autocrypt already?¶
In the event that two Autocrypt-enabled MUAs operate a single e-mail account, they could clash and cause usability problems: If they each manage their own secret key material, communicating peers might arbitrarily choose one key or another to encrypt to, and then certain mails will be unreadable with certain MUAs, in an apparently-arbitrary pattern based on the origin of the remote peer’s last-received message.
Level 1 therefore defines an Autocrypt setup process which involves sending and receiving a setup message. This allows two Autocrypt MUAs to share secret key material so that mails can be decrypted and read on both devices. This transfer of secret key material currently requires the user to type in a long setup code. For level 2, we aim to provide a pairing mechanism which only uses a short number to secure the peering.
Why do you cap Date
to the current time?¶
E-mail messages with Date
in the future could destroy
the ability to update the internal state.
However, since different MUAs process messages at different times, future-dated e-mails could result in state de-synchronization.
Todo
deeper analysis of this state de-sync issue with future-dated
e-mails, or alternate, more-stable approaches to dealing with wrong
Date
headers.
Why do you always encrypt-to-self?¶
Users expect to be able to read their outbox or Sent Messages folders. Autocrypt should not get in the way of that.
Why prefer-encrypt=mutual
and not more aggressive choices?¶
We considered and discarded several other designs for
prefer-encrypt
before settling on prefer-encrypt=mutual
. The
other designs we considered tended to have a scenario where e-mail was
automatically encrypted with greater frequency.
We opted for the less-aggressive design because we wanted to avoid annoyances for users who want to be able to get encrypted e-mail when they need it, but who actually have logistical trouble with handling encrypted messages (e.g. the user often uses a liimted MUA that cannot decrypt). In particular, unpleasant surprises (unwanted encrypted mail) tended to happen when the communicating peers have different preferences, which can demotivate the very people for whom encrypted mail capability is marginal anyway.
We want to broaden the group of people who might be able to use encrypted mail; to reduce the pressure to uninstall mail encryption capabilities; and to reduce the human-to-human pushback (“please quit sending me encrypted mail”). So we only automatically encrypt between peers who have both opted in.
Why not use a better KDF for symmetric encryption of the Setup Message?¶
Use of a memory-hard KDF like scrypt or argon2 would be desirable in the future. However, at the point of this writing this is not specified in OpenPGP. It is a bigger concern to preserve compatibility and avoid friction with presently deployed OpenPGP software.
Where does the “35 days” limit come from?¶
The recommendation algorithm uses a duration gap of 35 days to make a decision in a few places. This is an arbitrary value, which seemed plausible to most people who worked on the specification, based on the idea that for people who you want to communicate with regularly, it’s not uncommon that the user has exchanged e-mails at least once a month. It’s intended to be slightly more than monthly, so that people who have scheduled e-mail exchanges (e.g. “please check in on the 1st of the month”) will stay current.
Future revisions to the recommendation algorithm may change this cutoff. If you have evidence that there are algorithms that provide better results, please share them!